Please use this identifier to cite or link to this item: http://hdl.handle.net/11452/20838
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAcar, Memiş-
dc.contributor.authorKing, Tim G.-
dc.contributor.authorÖzipek, Bülent-
dc.date.accessioned2021-06-25T07:42:30Z-
dc.date.available2021-06-25T07:42:30Z-
dc.date.issued1993-
dc.identifier.citationÜlkü, Ş. vd. (1993). ''Fiber alignment and straightening in opening for open-end spinning''. Textile Research Journal, 63(6), 309-312.en_US
dc.identifier.issn0040-5175-
dc.identifier.urihttps://doi.org/10.1177/004051759306300601-
dc.identifier.urihttps://journals.sagepub.com/doi/abs/10.1177/004051759306300601-
dc.identifier.urihttp://hdl.handle.net/11452/20838-
dc.description.abstractSliver separation is an essential operation in open-end spinning. Ideally, the sliver should be separated down to individual fibers, each of which is transported in a fully extended configuration. In reality, however, fiber behavior is far from ideal. Because yarn properties are affected by the effective fiber length, alignment of fibers in the air flow should be achieved and maintained, and the fibers must be delivered onto the spinning surface of the spinner in a parallel, well oriented condition. To obtain straight fibers in the air flow to the twisting process, the fibers must be removed in a straightened form, or straightened during removal, from the pin-clothing of the opening roller.en_US
dc.language.isoenen_US
dc.publisherTextile Research Insten_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAtıf Gayri Ticari Türetilemez 4.0 Uluslararasıtr_TR
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectMaterials scienceen_US
dc.subjectFlow visualizationen_US
dc.subjectHigh speed photographyen_US
dc.subjectNatural fibersen_US
dc.subjectSpinning machinesen_US
dc.subjectCotton fibresen_US
dc.subjectFibre alignmenten_US
dc.subjectFibre straightnessen_US
dc.subjectPhotography, high-speeden_US
dc.subjectPolyester fibresen_US
dc.subjectRollers, openingen_US
dc.subjectSpinning, open-end, rotoren_US
dc.subjectAir flowen_US
dc.subjectFiber alignmenten_US
dc.subjectFiber straighteningen_US
dc.subjectHigh speed film analysisen_US
dc.subjectOpen end rotor spinning machinesen_US
dc.subjectOpen end spinningen_US
dc.subjectOpening rolleren_US
dc.subjectSliver separationen_US
dc.subjectSpinning (fibers)en_US
dc.subjectMaterials Scienceen_US
dc.titleFiber alignment and straightening in opening for open-end spinningen_US
dc.typeArticleen_US
dc.identifier.wosA1993LE16200001tr_TR
dc.identifier.scopus2-s2.0-0027464049tr_TR
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergitr_TR
dc.contributor.departmentUludağ Üniversitesi/Mühendislik Fakültesi/Tekstil Mühendisliği Bölümü.tr_TR
dc.identifier.startpage309tr_TR
dc.identifier.endpage312tr_TR
dc.identifier.volume63tr_TR
dc.identifier.issue6tr_TR
dc.relation.journalTextile Research Journaltr_TR
dc.contributor.buuauthorÜlkü, Şükriye-
dc.relation.collaborationYurt dışıtr_TR
dc.relation.collaborationYurt içitr_TR
dc.subject.wosMaterials science, textilesen_US
dc.indexed.wosSCIEen_US
dc.indexed.scopusScopusen_US
Appears in Collections:Scopus
Web of Science

Files in This Item:
File Description SizeFormat 
Fiber alignment in OE spinning.pdf301.71 kBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons