Please use this identifier to cite or link to this item:
http://hdl.handle.net/11452/24186
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.date.accessioned | 2022-01-20T11:07:42Z | - |
dc.date.available | 2022-01-20T11:07:42Z | - |
dc.date.issued | 2012 | - |
dc.identifier.citation | Ertan, T. vd. (2012). "Effects of welding parameters on the mechanical properties of inert gas welded 6063 aluminum alloys". Materials Testing, 54(1), 13-18. | en_US |
dc.identifier.issn | 0025-5300 | - |
dc.identifier.uri | https://doi.org/10.3139/120.110292 | - |
dc.identifier.uri | https://www.degruyter.com/document/doi/10.3139/120.110292/html | - |
dc.identifier.uri | http://hdl.handle.net/11452/24186 | - |
dc.description.abstract | The influence of welding parameters, namely welding current and gas flow rate, on the mechanical properties of Gas Tungsten Arc Welding (GTAW) and Shielded Metal Arc Welding (SMAW) welded 6063 Aluminum alloy (AA 6063) has been investigated. In order to study the effect of the welding current and gas flow rate, microstructural examination, hardness measurements and room temperature tensile tests have been carried out. The experimental results show that the mechanical properties of GTAW welded joints have better mechanical properties than those of SMAW welded joints. Increasing the welding current appeared to have a beneficial effect on the mechanical properties. However, either increasing or decreasing the gas flow rate resulted in a decrease of hardness and tensile strength. It was also found that, the highest strength was obtained in urAw welded samples at 220 A and 15 Vmin gas flow rate. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Walter de Gruyter Gmbh | de |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Materials science | en_US |
dc.subject | Porosity | en_US |
dc.subject | Aluminum | en_US |
dc.subject | Aluminum alloys | en_US |
dc.subject | Electric arc welding | en_US |
dc.subject | Electric welding | en_US |
dc.subject | Flow of gases | en_US |
dc.subject | Flow rate | en_US |
dc.subject | Gas metal arc welding | en_US |
dc.subject | Gas welding | en_US |
dc.subject | Gases | en_US |
dc.subject | Hardness | en_US |
dc.subject | Inert gases | en_US |
dc.subject | Mechanical properties | en_US |
dc.subject | Tensile strength | en_US |
dc.subject | Tensile testing | en_US |
dc.subject | Welds | en_US |
dc.subject | 6063 aluminum alloy | en_US |
dc.subject | Beneficial effects | en_US |
dc.subject | Gas tungsten arc welding | en_US |
dc.subject | Hardness measurement | en_US |
dc.subject | Microstructural examination | en_US |
dc.subject | Shielded metal arc welding | en_US |
dc.subject | Welding current | en_US |
dc.subject | Welding parameters | en_US |
dc.subject | Welding | en_US |
dc.title | Effects of welding parameters on the mechanical properties of inert gas welded 6063 aluminum alloys | en_US |
dc.type | Article | en_US |
dc.identifier.wos | 000299981200004 | tr_TR |
dc.identifier.scopus | 2-s2.0-84855878166 | tr_TR |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi | tr_TR |
dc.contributor.department | Uludağ Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü. | tr_TR |
dc.identifier.startpage | 13 | tr_TR |
dc.identifier.endpage | 18 | tr_TR |
dc.identifier.volume | 54 | tr_TR |
dc.identifier.issue | 1 | tr_TR |
dc.relation.journal | Materials Testing | en_US |
dc.contributor.buuauthor | Ertan, Tüner | - |
dc.contributor.buuauthor | Ertan, Rukiye | - |
dc.contributor.buuauthor | Uğuz, Agâh | - |
dc.subject.wos | Materials science, characterization & testing | en_US |
dc.indexed.wos | SCIE | en_US |
dc.indexed.scopus | Scopus | en_US |
dc.wos.quartile | Q4 | en_US |
dc.contributor.scopusid | 54895461000 | tr_TR |
dc.contributor.scopusid | 35772500300 | tr_TR |
dc.contributor.scopusid | 7004907051 | tr_TR |
dc.subject.scopus | Gas Tungsten Arc Welding; Welds; Heat Affected Zone | en_US |
Appears in Collections: | Scopus Web of Science |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.