1. Açık Erişim@BUU
  2. İndeksli Yayınlar
  3. Web of Science
Please use this identifier to cite or link to this item: http://hdl.handle.net/11452/27500
Full metadata record
DC FieldValueLanguage
dc.date.accessioned2022-06-29T12:02:26Z-
dc.date.available2022-06-29T12:02:26Z-
dc.date.issued2010-
dc.identifier.citationIşık, Y. (2010). "Tool life and performance comparison of coated tools in metal cutting". International Journal of Materials and Product Technology, 39(3-4), Special Issue, 240-250.en_US
dc.identifier.issn0268-1900-
dc.identifier.urihttps://doi.org/10.1504/IJMPT.2010.035801-
dc.identifier.urihttps://www.inderscience.com/info/inarticletoc.php?jcode=ijmpt&year=2010&vol=39&issue=3/4-
dc.identifier.urihttp://hdl.handle.net/11452/27500-
dc.description.abstractThe objective of the present work is to assess the effect of different coating materials on machinability in the turning of AISI 1050 steel. The cutting tools used in this research are PVD coated TiAlN, and CVD coated TiC + TiCN + TiN, TiC + AI(2)O(3) + TiN and TiN + TiCN + TiN inserts (ISO P25). The type of inserts is DNMG 150608. During the experiments cutting forces, and flank wear values were measured throughout the tool life. The machining performance of different coating materials was evaluated. In addition, cost analysis based on total machining cost per part was performed for the comparison of the economic viability between the different coating materials.en_US
dc.language.isoenen_US
dc.publisherInderscience Enterprisesen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFlank wearen_US
dc.subjectTool lifeen_US
dc.subjectCutting forcesen_US
dc.subjectCoatingen_US
dc.subjectCutting performanceen_US
dc.subjectMachining performanceen_US
dc.subjectWear mechanismsen_US
dc.subjectSteelen_US
dc.subjectCoatingsen_US
dc.subjectInsertsen_US
dc.subjectSpeeden_US
dc.subjectMaterials scienceen_US
dc.subjectAluminum compoundsen_US
dc.subjectCost benefit analysisen_US
dc.subjectMetal cuttingen_US
dc.subjectPlatingen_US
dc.subjectTitanium carbideen_US
dc.subjectTitanium nitrideen_US
dc.subjectWear of materialsen_US
dc.subjectCoating materialen_US
dc.subjectEconomic viabilityen_US
dc.subjectPerformance comparisonen_US
dc.subjectTool lifeen_US
dc.subjectCutting toolsen_US
dc.titleTool life and performance comparison of coated tools in metal cuttingen_US
dc.typeArticleen_US
dc.identifier.wos000285242300002tr_TR
dc.identifier.scopus2-s2.0-77957822096tr_TR
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergitr_TR
dc.contributor.departmentUludağ Üniversitesi/Teknik Bilimler Meslek Yüksekokulu.tr_TR
dc.identifier.startpage240tr_TR
dc.identifier.endpage250tr_TR
dc.identifier.volume39tr_TR
dc.identifier.issue3-4, Special Issuetr_TR
dc.relation.journalInternational Journal of Materials and Product Technologyen_US
dc.contributor.buuauthorIşık, Yahya-
dc.subject.wosMaterials science, multidisciplinaryen_US
dc.indexed.wosSCIEen_US
dc.indexed.scopusScopusen_US
dc.wos.quartileQ4en_US
dc.contributor.scopusid8981150600tr_TR
dc.subject.scopusCutting Force; Carbide Tools; Inconel (Trademark)en_US
Appears in Collections:Scopus
Web of Science

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.