Bu öğeden alıntı yapmak, öğeye bağlanmak için bu tanımlayıcıyı kullanınız: http://hdl.handle.net/11452/22476
Başlık: Improving the antibacterial activity of cotton fabrics finished with triclosan by the use of 1,2,3,4-butanetetracarboxylic acid and citric acid
Yazarlar: Uludağ Üniversitesi/Mühendislik Fakültesi/Tekstil Mühendisliği Bölümü.
0000-0001-8043-4148
Orhan, Mehmet
Kut, Dilek
Güneşoğlu, Cem
AAH-4335-2021
M-2463-2018
35307795300
55027507400
8299162200
Anahtar kelimeler: Biological applications of polymers
Crosslinking
Electron microscopy
Polycarboxylic acids
Physical-properties
Cellulose
Durability
Efficacy
Polymer science
Bleaching
Citric acid
Cotton
Cross linking
Finishing
Hydrogen
Hydrogen peroxide
Textiles
Washing
Cleaning
Cotton fabrics
Durability
Fabrics
Hydrogen
Ion beams
Laundering
Textile finishing
Textile processing
Antimicrobial property
Cost reduction
Cotton fabric
Acid concentrations
Anti-bacterial activities
Anti-bacterial properties
Antibacterial textiles
Biological applications of polymers
Breaking strengths
Butanetetracarboxylic acids
Cross-linking agents
Crosslinked
Electron microscopy
Finishing process
Finishing treatments
High productivities
Polycarboxylic acids
Processing costs
Stand-alone
Triclosan
Acids
Yayın Tarihi: 5-Şub-2009
Yayıncı: Wiley
Atıf: Orhan, M. vd. (2009). "Improving the antibacterial activity of cotton fabrics finished with triclosan by the use of 1,2,3,4-butanetetracarboxylic acid and citric acid". Journal of Applied Polymer Science, 111(3), 1344-1352.
Özet: For producing antibacterial textiles, the conventional finishing processes have high productivity and low processing costs, but textiles finished in these ways exhibit low durability against laundering. Therefore, cotton fabrics were bleached with hydrogen peroxide, finished with triclosan, and then treated with polycarboxylic acids such as 1,2,3,4-butanetetracarboxylic acid (BTCA) and citric acid (CA) as crosslinking agents to provide durable antibacterial properties. The surface of fibers treated with BTCA had a greater crosslinked area, and the surfaces of fabrics treated with CA were exposed to greater amounts of deformation due to the mechanical and chemical influences after 50 launderings. The bleaching and finishing treatments did not dramatically affect the breaking strength. However, the polycarboxylic acid treatment (both BTCA and CA) alone showed reductions in the breaking strength when the acid concentration was increased. The polycarboxylic acids were fairly effective against both bacteria, even at lower concentrations, when they were applied to stand-alone cotton fabrics, whereas the antibacterial activity decreased somewhat after the use of polycarboxylic acid and triclosan in the same recipes. Adding polycarboxylic acids to the antibacterial finishing recipes enhanced the durability after 50 launderings, and the durability of the recipes containing BTCA was much higher than that of the recipes containing CA.
URI: https://doi.org/10.1002/app.25083
https://onlinelibrary.wiley.com/doi/10.1002/app.25083
http://hdl.handle.net/11452/22476
ISSN: 0021-8995
Koleksiyonlarda Görünür:Scopus
Web of Science

Bu öğenin dosyaları:
Bu öğeyle ilişkili dosya bulunmamaktadır.


DSpace'deki bütün öğeler, aksi belirtilmedikçe, tüm hakları saklı tutulmak şartıyla telif hakkı ile korunmaktadır.