Bu öğeden alıntı yapmak, öğeye bağlanmak için bu tanımlayıcıyı kullanınız:
http://hdl.handle.net/11452/24912
Başlık: | Wear behavior of nitrogen implanted PVD-coated hard metal cutting inserts |
Yazarlar: | Öztarhan, Ahmet Uludağ Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü. Malyer, Elif 8398309300 |
Anahtar kelimeler: | Materials science Physics Cutting inserts Surface modification Ion beam modification Cutting forcescutting performances Flank wear Wear Chemical vapor deposition Data acquisition Dynamometers Ion implantation Metal cutting Nitrogen Physical vapor deposition Steel Thin films Wear of materials Charge amplifiers Cutting forces Inserts Tool life Cutting tools |
Yayın Tarihi: | 22-Haz-2005 |
Yayıncı: | Elsevier Science |
Atıf: | Malyer, E. ve Öztarhan, A. (2005). "Wear behavior of nitrogen implanted PVD-coated hard metal cutting inserts". Surface and Coatings Technology, 196(1-3), 369-372. |
Özet: | Tool life can be long and productive, or short and disastrous. Understanding the basic forces in the metal-cutting process that contribute to tool wear or failure will help you use today's tool technologies to ensure that your cutting tools will have a long and productive life [CNC Mach. 5 (2001)]. Thin films, deposited by plasma vapor deposition (PVD) or chemical vapor deposition (CVD), are commonly used techniques to ensure long tool life on cutting inserts and tools as compared with ion implantation. This paper compares the wear behavior of PVD TiCN-coated cutting inserts with the nitrogen ion implanted PVD TiCN-coated ones. These inserts are used in dry turning of steel AISI-SAE 1050 under three different cutting speeds. Cutting forces are measured during cutting by using a piezoelectric dynamometer, charge amplifiers and a PC-based data acquisition system. Results of the turning tests are discussed in terms of tool life, flank wear and cutting forces. |
Açıklama: | Bu çalışma, 21-26 Eylül 2003 tarihinde San Antonio[ABD]'de düzenlenen 13. International Conference on Surface Modification of Materials by Ion Beams'da bildiri olarak sunulmuştur. |
URI: | https://doi.org/10.1016/j.surfcoat.2004.08.205 https://www.sciencedirect.com/science/article/pii/S0257897204008357 http://hdl.handle.net/11452/24912 |
ISSN: | 0257-8972 |
Koleksiyonlarda Görünür: | Scopus Web of Science |
Bu öğenin dosyaları:
Bu öğeyle ilişkili dosya bulunmamaktadır.
DSpace'deki bütün öğeler, aksi belirtilmedikçe, tüm hakları saklı tutulmak şartıyla telif hakkı ile korunmaktadır.