1. Açık Erişim@BUU
  2. İndeksli Yayınlar
  3. Web of Science
Please use this identifier to cite or link to this item: http://hdl.handle.net/11452/27500
Title: Tool life and performance comparison of coated tools in metal cutting
Authors: Uludağ Üniversitesi/Teknik Bilimler Meslek Yüksekokulu.
Işık, Yahya
8981150600
Keywords: Flank wear
Tool life
Cutting forces
Coating
Cutting performance
Machining performance
Wear mechanisms
Steel
Coatings
Inserts
Speed
Materials science
Aluminum compounds
Cost benefit analysis
Metal cutting
Plating
Titanium carbide
Titanium nitride
Wear of materials
Coating material
Economic viability
Performance comparison
Tool life
Cutting tools
Issue Date: 2010
Publisher: Inderscience Enterprises
Citation: Işık, Y. (2010). "Tool life and performance comparison of coated tools in metal cutting". International Journal of Materials and Product Technology, 39(3-4), Special Issue, 240-250.
Abstract: The objective of the present work is to assess the effect of different coating materials on machinability in the turning of AISI 1050 steel. The cutting tools used in this research are PVD coated TiAlN, and CVD coated TiC + TiCN + TiN, TiC + AI(2)O(3) + TiN and TiN + TiCN + TiN inserts (ISO P25). The type of inserts is DNMG 150608. During the experiments cutting forces, and flank wear values were measured throughout the tool life. The machining performance of different coating materials was evaluated. In addition, cost analysis based on total machining cost per part was performed for the comparison of the economic viability between the different coating materials.
URI: https://doi.org/10.1504/IJMPT.2010.035801
https://www.inderscience.com/info/inarticletoc.php?jcode=ijmpt&year=2010&vol=39&issue=3/4
http://hdl.handle.net/11452/27500
ISSN: 0268-1900
Appears in Collections:Scopus
Web of Science

Files in This Item:
There are no files associated with this item.
Show full item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.